2. Pick Your Favourite Class

2. Pick Your Favourite Class

Additional Points to Consider
- Pick a class that you can race locally, track availability and fellow racers play an important role in your choice!
- Electric is easy to do alone, nitro is possible, but it is harder alone, and for racing you will have to make friends with someone, so you have a mechanic.

Benefits of Electric Classes
- Can be raced indoors and outdoors, specially good in colder climates during winters.
- Many classes suitable for youngsters and beginners, as it's easy to limit their speed.

Combine a Few
- Many people run one class outdoors in the summer, and another indoors in the winter. For example nitro in the summer, and electric in the winter. Sometimes even switching between classes, offroad in the summer, on road in the winter, for example.

Scale Motorsports - ONROAD Full Course 3 Month Access, by Invisible Speed

Buy nowLearn more

Information About This Course

  • 1. What The Course is About
  • 2. Discord Access1
  • 3. Credit & Thanks!
  • 4. Earn Your € Back - Yes, Really
  • FAQ About This Course4

Module 1 - An Introduction To Scale Motorsports

  • 1. What is Scale Motorsports & My Story
  • 1.1. ONROAD - Welcome To The Course, by Alexander Hagberg
  • 2. Pick Your Favourite Class
  • 2.1. ONROAD - 1:12th Introduction, by Alexander Hagberg
  • 2.2. ONROAD 1:10th Electric Touring Car Introduction, by Alexander Hagberg
  • 3. Finding Information
  • 4. Where To Buy

Module 2 - Choosing Your Equipment

  • 1. What Car & Equipment To Buy?
  • 2. What Tools & Accessories Do You Need?

Module 3 - Preparing Your Equipment

  • 1.1. Shock Absorbers - 1:8th Nitro Buggy Build, by David Ronnefalk
  • 1.2 Differentials - 1:8th Nitro Buggy Build, by David Ronnefalk
  • 1.3 Front Gearbox Part 1 - 1:8th Nitro Buggy Build, by David Ronnefalk
  • 1.4 Front Gearbox Part 2 - 1:8th Nitro Buggy Build, by David Ronnefalk
  • 1.5 Front Hubs - 1:8th Nitro Buggy Build, by David Ronnefalk
  • 1.6 Rear Gearbox - 1:8th Nitro Buggy Build, by David Ronnefalk
  • 2. Installing Power & Control
  • 3.1. Engine Basics
  • 3.2. The Idle Gap
  • 3.3 - Engine Break in - UPDATED 01.01.2022
  • 4.1 ONROAD - 1:12th Build Unboxing, by Alexander Hagberg
  • 4.2. ONROAD 1:12th Build, Front Suspension, by Alexander Hagberg
  • 4.3. ONROAD 1:12th Build, Rear Suspension, by Alexander Hagberg
  • 4.4. ONROAD 1:12th Build, Differential & Solid Axle, by Alexander Hagberg
  • 4.5. ONROAD 1:12th Build, Shock, by Alexander Hagberg
  • 4.6. ONROAD 1:12th Build, Servo Installation, by Alexander Hagberg
  • 4.7. ONROAD 1:12th Build, Electronics, by Alexander Hagberg
  • 4.8 ONROAD 1:12th Build, Body, by Alexander Hagberg
  • 4.9. ONROAD 1:12th Build, Final Steps, by Alexander Hagberg
  • 4.10. ONROAD 1:12th Tyres, by Alexander Hagberg
  • 4.11. ONROAD 1:12th Tyre Truing, by Alexander Hagberg
  • 4.12. ONROAD 1:12th Tyre Tip - Avoiding Traction Rolling, by Alexander Hagberg
  • 4.13. ONROAD 1:12th Starting Setup, by Alexander Hagberg
  • 5.1. ONROAD 1:10th Build, Chassis Prep, by Alexander Hagberg
  • 5.2. ONROAD 1:10th Build, Rear Diff, by Alexander Hagberg
  • 5.3. ONROAD 1:10th Build, Front Solid Axle, by Alexander Hagberg
  • 5.4. ONROAD 1:10th Build, Lower Arms, by Alexander Hagberg
  • 5.5. ONROAD 1:10th Build, Bulkheads, by Alexander Hagberg
  • 5.6. ONROAD 1:10th Build, Upper Arms, by Alexander Hagberg
  • 5.7. ONROAD 1:10th Build, Anti-Roll Bars, by Alexander Hagberg
  • 5.8. ONROAD 1:10th Build, Driveshafts, by Alexander Hagberg
  • 5.9. ONROAD 1:10th Build, Upper Deck, by Alexander Hagberg
  • 5.10. ONROAD 1:10th Build, Steering, by Alexander Hagberg
  • 5.11. ONROAD 1:10th Build, Shocks, by Alexander Hagberg
  • 5.12. ONROAD 1:10th Build, Electronics, by Alexander Hagberg
  • 5.13. ONROAD 1:10th Build, Weight Balance, by Alexander Hagberg
  • 5.14. ONROAD 1:10th Build, Body, by Alexander Hagberg
  • 5.15. ONROAD 1:10th Build, Tires, by Alexander Hagberg
  • 5.16. ONROAD 1:10th Build, Final Checks, by Alexander Hagberg

Module 4 - Heading To The Track For The 1st Time

  • 1. Advice For Your 1st Day at The Track
  • 2. Race Tune Your Engine
  • 3. ONROAD 1:10th Checks Between Runs, by Alexander Hagberg
  • 3.1. ONROAD 1:12th Checks Between Runs, by Alexander Hagberg
  • 4. Driving Basics & First Jumping Lesson

Module 5 - Radio Settings, Maintenance, 1st Setup Changes & Practicing

  • 1. Cleaning Your Car
  • 2. Maintenance & 1st Setup Changes
  • 2.1. ONROAD 1:10th Maintenance, by Alexander Hagberg
  • 2.2. ONROAD 1:12th Maintenance, by Alexander Hagberg
  • 2.3. ONROAD 1:10th, First Setup Changes, by Alexander Hagberg
  • 2.4. ONROAD 1:12th First Setup Changes, by Alexander Hagberg
  • 2.5. ONROAD Common Errors With 1:10th Electric TC
  • 3. Helpful Radio Settings - Speed, EPA, Dual Rate
  • 4. More Thoughts On Driving & Practice
  • 4.1. LIVE Meeting 2 - 2023 Driving & Jumping

Module 6 - Your 1st Race

  • 1. How Races Are Run
  • 2. PPPPPP - Prior Preparation Prevents Piss Poor Performance
  • 3. Advice For Race Day

Module 7 - Getting Faster & Improving Your Setup

  • 1. Preventive Maintenance
  • 2. Looking The Part - (2022)
  • 3. Advanced Tools - (2022)
  • 4. Good Adjustments To Make
  • 5. Radio Settings - Expo & Quick Brake Adjustment
  • 6. ONROAD 10th TC Servo Horn Height

Module 8 - Travelling To A Race - Released Later

  • Travelling to Races

Module 9 - Improving Your Race Programme

  • 1. Equipment & Engine Maintenance - (2022)
  • 2. Attitude & Mindset
  • 3. Building a Team - (2022)

Module 10 - Understanding Your Car, A Deep Dive Into Setup

  • Introduction To Module 10
  • Download Setup Documents Here 26052022
  • 0. How To Test - Start Here (2022)
  • 1.1. Tyres
  • 1.2. Load Transfer
  • 1.3. Pitch and Roll
  • 1.4. Roll Centres
  • 1.5. Fundamentals - Conclusion
  • THE FUNDAMENTALS QUIZ!
  • 2.1. Roll Centre Basics
  • 2.2. Jacking
  • 2.3. Camber Gain
  • 2.4 Intro To Adjusting RC & Link Length
  • 2.5. Adjusting RC - Link Angle, Height & Axle Height
  • 2.6. Adjusting RC - Arm Height
  • 2.7. Adjusting - RC Conclusion
  • ROLL CENTRE QUIZ!
  • 3. Ride Height
  • 4. Down & Up-Travel
  • 5.1. Camber
  • 5.2. Toe - (2022)
  • 6. Anti-Roll Bars
  • 7. Kickup & Antisquat
  • 8. Caster1
  • 9. King Pin Inclination
  • 10.1. Steering Angles - Ackermann
  • 10.2 Bumpsteer - (2022)
  • 11.1. Shock Basics
  • 11.2. Shock Oils
  • 11.3. Shock Springs
  • 11.4. Shock Pistons
  • 11.5. Shock Positions
  • 11.6. Emulsion vs Bladder
  • 12.1 Differentials Overview
  • 12.2 Front Diff
  • 12.3 Centre Diff
  • 13. Trackwidth - (2022)
  • 14. Wheelbase - (2022)
  • 15. Driveshafts & Suspension Bind - (2022)
  • 16. Gear Ratios - (2022)
  • 17. Flex & Stiffness - (2022)
  • 18. Weight Distribution - (2022)
  • 19. Tyre Choice - (2022)
  • 20. Aerodynamics - (2022)
  • 21. Setups For Different Track Conditions - (2022)
  • Case Study - Vaasa Finnish Nationals 2021 (2022)

10.1. LIVE Meetings, Homework Discussion, Case Studies

  • ONROAD - Alexander Hagberg Setup Conversation

Module 11 - Getting Sponsored

  • 1. An Introduction To Sponsorship
  • More in 2022

Module 12 - Gaining An Edge - Released Later

  • Gaining An Edge

Module 13 - Conclusion & Future Updates

  • My Thoughts On The Course