Preview unavailable

Information About This Course

• 1. What The Course is About

• 2. Discord Access3

• 3. Credit & Thanks!1

• 4. Earn Your € Back - Yes, Really

• FAQ About This Course1

Module 1 - An Introduction To Scale Motorsports

• 1. What is Scale Motorsports & My Story3

• 1.1. ONROAD - Welcome To The Course, by Alexander Hagberg

• 2. Pick Your Favourite Class1

• 2.1. ONROAD - 1:12th Introduction, by Alexander Hagberg1

• 2.2. ONROAD 1:10th Electric Touring Car Introduction, by Alexander Hagberg

• 3. Finding Information4

• 4. Where To Buy

Module 2 - Choosing Your Equipment

• 1. What Car & Equipment To Buy?3

• 2. What Tools & Accessories Do You Need?

Module 3 - Preparing Your Equipment

• 1.1. Shock Absorbers - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.2 Differentials - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.3 Front Gearbox Part 1 - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.4 Front Gearbox Part 2 - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.5 Front Hubs - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.6 Rear Gearbox - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.7 Rear Gearbox Part 2 - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.8 Rear Hubs - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.9 Centre Diff Mount - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.10 Steering System - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.11 Chassis Assembly - 1:8th Nitro Buggy Build, by David Ronnefalk

• 1.12 Steering Links - 1:8th Nitro Buggy Build, by David Ronnefalk

• 2. Servos - Installing Power & Control - 1:8th Nitro Buggy Build, by David Ronnefalk

• 2.1 Linkages - Installing Power & Control - 1:8th Nitro Buggy Build, by David Ronnefalk

• 2.2 Clutch, Engine - Installing Power & Control - 1:8th Nitro Buggy Build, by David Ronnefalk

• 2.3 Air Filter - Installing Power & Control - 1:8th Nitro Buggy Build, by David Ronnefalk

• 2.4 Final Assembly - Installing Power & Control - 1:8th Nitro Buggy Build, by David Ronnefalk

• 3.1. Engine Basics

• 3.2. The Idle Gap2

• 3.3 - Engine Break in

• 4.1. ONROAD - 1:12th Build Unboxing, by Alexander Hagberg

• 4.2. ONROAD 1:12th Build, Front Suspension, by Alexander Hagberg

• 4.3. ONROAD 1:12th Build, Rear Suspension, by Alexander Hagberg

• 4.4. ONROAD 1:12th Build, Differential & Solid Axle, by Alexander Hagberg

• 4.5. ONROAD 1:12th Build, Shock, by Alexander Hagberg

• 4.6. ONROAD 1:12th Build, Servo Installation, by Alexander Hagberg

• 4.7. ONROAD 1:12th Build, Electronics, by Alexander Hagberg

• 4.8 ONROAD 1:12th Build, Body, by Alexander Hagberg

• 4.9. ONROAD 1:12th Build, Final Steps, by Alexander Hagberg

• 4.10. ONROAD 1:12th Tyres, by Alexander Hagberg

• 4.11. ONROAD 1:12th Tyre Truing, by Alexander Hagberg

• 4.12. ONROAD 1:12th Tyre Tip - Avoiding Traction Rolling, by Alexander Hagberg1

• 4.13. ONROAD 1:12th Starting Setup, by Alexander Hagberg

• 5.1. ONROAD 1:10th Build, Chassis Prep, by Alexander Hagberg

• 5.2. ONROAD 1:10th Build, Rear Diff, by Alexander Hagberg

• 5.3. ONROAD 1:10th Build, Front Solid Axle, by Alexander Hagberg

• 5.4. ONROAD 1:10th Build, Lower Arms, by Alexander Hagberg

• 5.5. ONROAD 1:10th Build, Bulkheads, by Alexander Hagberg

• 5.6. ONROAD 1:10th Build, Upper Arms, by Alexander Hagberg

• 5.7. ONROAD 1:10th Build, Anti-Roll Bars, by Alexander Hagberg

• 5.8. ONROAD 1:10th Build, Driveshafts, by Alexander Hagberg

• 5.9. ONROAD 1:10th Build, Upper Deck, by Alexander Hagberg

• 5.10. ONROAD 1:10th Build, Steering, by Alexander Hagberg

• 5.11. ONROAD 1:10th Build, Shocks, by Alexander Hagberg

• 5.12. ONROAD 1:10th Build, Electronics, by Alexander Hagberg

• 5.13. ONROAD 1:10th Build, Weight Balance, by Alexander Hagberg

• 5.14. ONROAD 1:10th Build, Body, by Alexander Hagberg

• 5.15. ONROAD 1:10th Build, Tires, by Alexander Hagberg

• 5.16. ONROAD 1:10th Build, Final Checks, by Alexander Hagberg

Module 4 - Heading To The Track For The 1st Time

• 1. Advice For Your 1st Day at The Track1

• 2. Race Tune Your Engine7

• 3. Driving Basics & First Jumping Lesson1

• 4. ONROAD 1:12th Checks Between Runs, by Alexander Hagberg

• 4.1. ONROAD 1:10th Checks Between Runs, by Alexander Hagberg

Module 5 - Radio Settings, Maintenance, 1st Setup Changes & Practicing

• 1. Cleaning Your Car2

• 1.1 LIVE Meeting 1 - 2023 The Basics, Car Prep, Setup Terms

• 2. Maintenance & 1st Setup Changes2

• 2.1. ONROAD 1:12th Maintenance, by Alexander Hagberg1

• 2.2. ONROAD 1:10th Maintenance, by Alexander Hagberg

• 2.3. ONROAD 1:12th First Setup Changes, by Alexander Hagberg

• 2.4. ONROAD 1:10th, First Setup Changes, by Alexander Hagberg

• 3. Helpful Radio Settings - Speed, EPA, Dual Rate6

• 4. More Thoughts On Driving & Practice3

• 4.1. LIVE Meeting 2 - 2023 Driving & Jumping

Module 6 - Your 1st Race

• 1. How Races Are Run

• 2. PPPPPP - Prior Preparation Prevents Piss Poor Performance2

• 3. Advice For Race Day2

Module 7 - Getting Faster & Improving Your Setup

• 1. Preventive Maintenance1

• 1.2. Identifying a Bad Engine Bearing

• 4. Good Adjustments To Make

• 5. Radio Settings - Expo & Quick Brake Adjustment

• 6. Three Simple Overlooked FREE Things That Will Help You - YOUTUBE

Module 8 - Travelling To A Race - Released Later

• Travelling to Races

Module 9 - Improving Your Race Programme

• 2. Attitude & Mindset 7

• 2.1. Preparing For a Race - Keep it Simple

• 2.2. Preparing for your main – THINK!

Module 10 - Understanding Your Car, A Deep Dive Into Setup

• Introduction To Module 103

• Download Setup Documents Here 260520223

• 0. How To Test - Start Here 1

• 1.1. Tyres1

• 1.11 Tyres Addition Info - Slip Angle

• 1.2. Load Transfer

• 1.3. Pitch and Roll

• 1.4. Roll Centres

• 1.5. Fundamentals - Conclusion

• THE FUNDAMENTALS QUIZ!

• LIVE Meeting 3 - 2023 Setup Theory2

• 2.1. Roll Centre Basics1

• 2.2. Jacking

• 2.3. Camber Gain2

• 2.4 Intro To Adjusting RC & Link Length2

• 2.5. Adjusting RC - Link Angle, Height & Axle Height

• 2.6. Adjusting RC - Arm Height

• 2.7. Adjusting - RC Conclusion1

• Initial vs Overall Grip - LIVE Highlights

• ROLL CENTRE QUIZ!

• 3. Ride Height

• 4. Down & Up-Travel2

• 5.1. Camber

• 6. Anti-Roll Bars6

• 7. Kickup & Antisquat1

• 8. Caster4

• 9. King Pin Inclination5

• 10.1. Steering Angles - Ackermann1

• 10.2 Bumpsteer - (YOUTUBE)

• 11.1. Shock Basics

• 11.2. Shock Oils1

• 11.3. Shock Springs

• 11.4. Shock Pistons

• 11.5. Shock Positions2

• 11.6. Emulsion vs Bladder

• 12.1 Differentials Overview3

• 12.2 Front Diff

• 12.3 Centre Diff4

• 16. Gear Ratios

10.1 Homework Videos - LIVE Videos, Interviews, Case Studies

• 2023 Homework Google Document1

• 2023 Homework Briefing 1

• 2023 Jared Tebo's Thoughts on Homework Assignment

• ONROAD - Alexander Hagberg Setup Conversation3

• 2023 LIVE Meeting 5 - Q&A with Batlle, Ronnefalk & Tebo1

• 2023 Ryan Lutz LIVE Meeting 1 - Rough Track Setup & Tyres1

• 2023 Ryan Lutz LIVE Meeting 2 - Time at Durango, Driving & Setup Questions

• 2023 Bruno Coelho LIVE Meeting 1 - Onroad vs Offroad Driving & Setup

• 2023 Bruno Coelho LIVE Meeting 2 - Finding 0.3s in TC, and Future of RC

• 2024 Lutz LIVE - DNC vs PNB Setups

• 2024 Lutz LIVE - New Base Setup

• 2024 Lutz LIVE - New Kyosho Parts, Wicked Weekend

Module 11 - Getting Sponsored

• 1. An Introduction To Sponsorship1

Module 12 - Gaining An Edge - How To Become Even Better

• Reactive vs Proactive Driving

Module 13 - Conclusion & Future Updates

• My Thoughts On The Course (2024)5