Scale Motorsports - ONROAD Full Course 3 Month Access, by Invisible Speed
- Buy now
- Learn more
Information About This Course

1. What The Course is About
2. Discord Access
3. Credit & Thanks!
4. Earn Your € Back - Yes, Really
FAQ About This Course
Module 1 - An Introduction To Scale Motorsports

1. What is Scale Motorsports & My Story
1.1. ONROAD - Welcome To The Course, by Alexander Hagberg
2. Pick Your Favourite Class
2.1. ONROAD - 1:12th Introduction, by Alexander Hagberg
2.2. ONROAD 1:10th Electric Touring Car Introduction, by Alexander Hagberg
3. Finding Information
4. Where To Buy
Module 2 - Choosing Your Equipment

1. What Car & Equipment To Buy?
2. What Tools & Accessories Do You Need?
Module 3 - Preparing Your Equipment

1.1. Shock Absorbers - 1:8th Nitro Buggy Build, by David Ronnefalk
1.2 Differentials - 1:8th Nitro Buggy Build, by David Ronnefalk
1.3 Front Gearbox Part 1 - 1:8th Nitro Buggy Build, by David Ronnefalk
1.4 Front Gearbox Part 2 - 1:8th Nitro Buggy Build, by David Ronnefalk
1.5 Front Hubs - 1:8th Nitro Buggy Build, by David Ronnefalk
1.6 Rear Gearbox - 1:8th Nitro Buggy Build, by David Ronnefalk
2. Installing Power & Control
3.1. Engine Basics
3.2. The Idle Gap
3.3 - Engine Break in - UPDATED 01.01.2022
4.1 ONROAD - 1:12th Build Unboxing, by Alexander Hagberg
4.2. ONROAD 1:12th Build, Front Suspension, by Alexander Hagberg
4.3. ONROAD 1:12th Build, Rear Suspension, by Alexander Hagberg
4.4. ONROAD 1:12th Build, Differential & Solid Axle, by Alexander Hagberg
4.5. ONROAD 1:12th Build, Shock, by Alexander Hagberg
4.6. ONROAD 1:12th Build, Servo Installation, by Alexander Hagberg
4.7. ONROAD 1:12th Build, Electronics, by Alexander Hagberg
4.8 ONROAD 1:12th Build, Body, by Alexander Hagberg
4.9. ONROAD 1:12th Build, Final Steps, by Alexander Hagberg
4.10. ONROAD 1:12th Tyres, by Alexander Hagberg
4.11. ONROAD 1:12th Tyre Truing, by Alexander Hagberg
4.12. ONROAD 1:12th Tyre Tip - Avoiding Traction Rolling, by Alexander Hagberg
4.13. ONROAD 1:12th Starting Setup, by Alexander Hagberg
5.1. ONROAD 1:10th Build, Chassis Prep, by Alexander Hagberg
5.2. ONROAD 1:10th Build, Rear Diff, by Alexander Hagberg
5.3. ONROAD 1:10th Build, Front Solid Axle, by Alexander Hagberg
5.4. ONROAD 1:10th Build, Lower Arms, by Alexander Hagberg
5.5. ONROAD 1:10th Build, Bulkheads, by Alexander Hagberg
5.6. ONROAD 1:10th Build, Upper Arms, by Alexander Hagberg
5.7. ONROAD 1:10th Build, Anti-Roll Bars, by Alexander Hagberg
5.8. ONROAD 1:10th Build, Driveshafts, by Alexander Hagberg
5.9. ONROAD 1:10th Build, Upper Deck, by Alexander Hagberg
5.10. ONROAD 1:10th Build, Steering, by Alexander Hagberg
5.11. ONROAD 1:10th Build, Shocks, by Alexander Hagberg
5.12. ONROAD 1:10th Build, Electronics, by Alexander Hagberg
5.13. ONROAD 1:10th Build, Weight Balance, by Alexander Hagberg
5.14. ONROAD 1:10th Build, Body, by Alexander Hagberg
5.15. ONROAD 1:10th Build, Tires, by Alexander Hagberg
5.16. ONROAD 1:10th Build, Final Checks, by Alexander Hagberg
Module 4 - Heading To The Track For The 1st Time

1. Advice For Your 1st Day at The Track
2. Race Tune Your Engine
3. ONROAD 1:10th Checks Between Runs, by Alexander Hagberg
3.1. ONROAD 1:12th Checks Between Runs, by Alexander Hagberg
4. Driving Basics & First Jumping Lesson
Module 5 - Radio Settings, Maintenance, 1st Setup Changes & Practicing

1. Cleaning Your Car
2. Maintenance & 1st Setup Changes
2.1. ONROAD 1:10th Maintenance, by Alexander Hagberg
2.2. ONROAD 1:12th Maintenance, by Alexander Hagberg
2.3. ONROAD 1:10th, First Setup Changes, by Alexander Hagberg
2.4. ONROAD 1:12th First Setup Changes, by Alexander Hagberg
2.5. ONROAD Common Errors With 1:10th Electric TC
3. Helpful Radio Settings - Speed, EPA, Dual Rate
4. More Thoughts On Driving & Practice
4.1. LIVE Meeting 2 - 2023 Driving & Jumping
Module 6 - Your 1st Race

1. How Races Are Run
2. PPPPPP - Prior Preparation Prevents Piss Poor Performance
3. Advice For Race Day
Module 7 - Getting Faster & Improving Your Setup

1. Preventive Maintenance
2. Looking The Part - (2022)
3. Advanced Tools - (2022)
4. Good Adjustments To Make
5. Radio Settings - Expo & Quick Brake Adjustment
6. ONROAD 10th TC Servo Horn Height
Module 8 - Travelling To A Race - Released Later

Travelling to Races
Module 9 - Improving Your Race Programme

1. Equipment & Engine Maintenance - (2022)
2. Attitude & Mindset
3. Building a Team - (2022)
Module 10 - Understanding Your Car, A Deep Dive Into Setup

Introduction To Module 10
Download Setup Documents Here 26052022
0. How To Test - Start Here (2022)
1.1. Tyres
1.2. Load Transfer
1.3. Pitch and Roll
1.4. Roll Centres
1.5. Fundamentals - Conclusion
THE FUNDAMENTALS QUIZ!
2.1. Roll Centre Basics
2.2. Jacking
2.3. Camber Gain
2.4 Intro To Adjusting RC & Link Length
2.5. Adjusting RC - Link Angle, Height & Axle Height
2.6. Adjusting RC - Arm Height
2.7. Adjusting - RC Conclusion
ROLL CENTRE QUIZ!
3. Ride Height
4. Down & Up-Travel
5.1. Camber
5.2. Toe - (2022)
6. Anti-Roll Bars
7. Kickup & Antisquat
8. Caster
9. King Pin Inclination
10.1. Steering Angles - Ackermann
10.2 Bumpsteer - (2022)
11.1. Shock Basics
11.2. Shock Oils
11.3. Shock Springs
11.4. Shock Pistons
11.5. Shock Positions
11.6. Emulsion vs Bladder
12.1 Differentials Overview
12.2 Front Diff
12.3 Centre Diff
13. Trackwidth - (2022)
14. Wheelbase - (2022)
15. Driveshafts & Suspension Bind - (2022)
16. Gear Ratios - (2022)
17. Flex & Stiffness - (2022)
18. Weight Distribution - (2022)
19. Tyre Choice - (2022)
20. Aerodynamics - (2022)
21. Setups For Different Track Conditions - (2022)
Case Study - Vaasa Finnish Nationals 2021 (2022)
10.1. LIVE Meetings, Homework Discussion, Case Studies

ONROAD - Alexander Hagberg Setup Conversation
Module 11 - Getting Sponsored

1. An Introduction To Sponsorship
More in 2022
Module 12 - Gaining An Edge - Released Later

Gaining An Edge
Module 13 - Conclusion & Future Updates

My Thoughts On The Course

20. Aerodynamics - (2022)

Lesson unavailable

Please login to your account or buy the course.